One of the first things I wanted to try on my fresh Linux Mint 19.1 install was Docker. This post captures the steps I've taken to get Docker CE (community edition) version installed on my Linux-based Dell XPS laptop.
Docker in Linux Mint
Since Linux Mint is based on Ubuntu, you shouldn't have any issues getting Docker installed from the official repository of Docker.io. I have followed instructions from here: Docker Docs – Install Docker CE in Ubuntu.
I followed instruction pretty much word for word, except the part where you're adding a new apt repository to your Linux Mint.
In the procedure fully documented below, I have changed this command:
greys@xps:/$ sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
to this:
greys@xps:/$ sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu bionic stable"
This is because Linux Mint has its own version names and they don't match Ubuntu ones. But because I know that Linux Mint 19.1 is based on Ubuntu Bionic, I just made the replacement as shown above.
Install Docker CE in Linux Mint 19.1
Here are the full steps for the installation.
Installing Additional Packages
greys@xps:/$ sudo apt-get install \ > apt-transport-https \ > ca-certificates \ > curl \ > gnupg-agent \ > software-properties-common Reading package lists... Done Building dependency tree Reading state information... Done ca-certificates is already the newest version (20180409). The following additional packages will be installed: dirmngr gnupg gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpg-wks-server gpgconf gpgsm gpgv libcurl4 Suggested packages: tor parcimonie xloadimage scdaemon The following NEW packages will be installed: apt-transport-https gnupg-agent software-properties-common The following packages will be upgraded: curl dirmngr gnupg gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpg-wks-server gpgconf gpgsm gpgv libcurl4 13 upgraded, 3 newly installed, 0 to remove and 232 not upgraded. Need to get 2,535 kB of archives. After this operation, 224 kB of additional disk space will be used. Do you want to continue? [Y/n] y ...
Add Ubuntu version of Docker Repository To Our System
greys@xps:/$ curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add - OK greys@xps:/$ sudo apt-key fingerprint 0EBFCD88 pub rsa4096 2017-02-22 [SCEA] 9DC8 5822 9FC7 DD38 854A E2D8 8D81 803C 0EBF CD88 uid [ unknown] Docker Release (CE deb) <[email protected]> sub rsa4096 2017-02-22 [S] greys@xps:/$ sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu bionic stable" greys@xps:/$ sudo apt-get update Hit:1 http://archive.canonical.com/ubuntu bionic InRelease Get:2 http://security.ubuntu.com/ubuntu bionic-security InRelease [88.7 kB] Hit:3 http://archive.ubuntu.com/ubuntu bionic InRelease Hit:4 http://archive.ubuntu.com/ubuntu bionic-updates InRelease Get:5 http://archive.ubuntu.com/ubuntu bionic-backports InRelease [74.6 kB] Hit:6 https://download.docker.com/linux/ubuntu bionic InRelease Ign:7 http://packages.linuxmint.com tessa InRelease Hit:8 http://packages.linuxmint.com tessa Release Fetched 163 kB in 1s (239 kB/s) Reading package lists... Done greys@xps:$ sudo apt-get install docker-ce docker-ce-cli containerd.io Reading package lists... Done Building dependency tree Reading state information... Done Recommended packages: aufs-tools cgroupfs-mount | cgroup-lite git pigz The following NEW packages will be installed: containerd.io docker-ce docker-ce-cli 0 upgraded, 3 newly installed, 0 to remove and 243 not upgraded. Need to get 50.4 MB of archives. After this operation, 242 MB of additional disk space will be used. Get:1 https://download.docker.com/linux/ubuntu bionic/stable amd64 containerd.io amd64 1.2.2-3 [19.9 MB] Get:2 https://download.docker.com/linux/ubuntu bionic/stable amd64 docker-ce-cli amd64 5:18.09.2~3-0~ubuntu-bionic [13.2 MB] Get:3 https://download.docker.com/linux/ubuntu bionic/stable amd64 docker-ce amd64 5:18.09.2~3-0~ubuntu-bionic [17.4 MB] Fetched 50.4 MB in 5s (10.8 MB/s) Selecting previously unselected package containerd.io. (Reading database ... 259022 files and directories currently installed.) Preparing to unpack .../containerd.io_1.2.2-3_amd64.deb ... Unpacking containerd.io (1.2.2-3) ... Selecting previously unselected package docker-ce-cli. Preparing to unpack .../docker-ce-cli_5%3a18.09.2~3-0~ubuntu-bionic_amd64.deb ... Unpacking docker-ce-cli (5:18.09.2~3-0~ubuntu-bionic) ... Selecting previously unselected package docker-ce. Preparing to unpack .../docker-ce_5%3a18.09.2~3-0~ubuntu-bionic_amd64.deb ... Unpacking docker-ce (5:18.09.2~3-0~ubuntu-bionic) ... Setting up containerd.io (1.2.2-3) ... Created symlink /etc/systemd/system/multi-user.target.wants/containerd.service → /lib/systemd/system/containerd.service. Processing triggers for ureadahead (0.100.0-20) ... ureadahead will be reprofiled on next reboot Processing triggers for systemd (237-3ubuntu10.9) ... Processing triggers for man-db (2.8.3-2ubuntu0.1) ... Setting up docker-ce-cli (5:18.09.2~3-0~ubuntu-bionic) ... Setting up docker-ce (5:18.09.2~3-0~ubuntu-bionic) ... update-alternatives: using /usr/bin/dockerd-ce to provide /usr/bin/dockerd (dockerd) in auto mode Created symlink /etc/systemd/system/multi-user.target.wants/docker.service → /lib/systemd/system/docker.service. Created symlink /etc/systemd/system/sockets.target.wants/docker.socket → /lib/systemd/system/docker.socket. Processing triggers for ureadahead (0.100.0-20) ... Processing triggers for systemd (237-3ubuntu10.9) ...
Listing Docker Containers
There shouldn't be any:
greys@xps:/$ sudo docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
Checking Docker Version
greys@xps:/$ docker --version Docker version 18.09.2, build 6247962
Installing hello-world with Docker
greys@xps:/$ sudo docker run hello-world Unable to find image 'hello-world:latest' locally latest: Pulling from library/hello-world 1b930d010525: Pull complete Digest: sha256:2557e3c07ed1e38f26e389462d03ed943586f744621577a99efb77324b0fe535 Status: Downloaded newer image for hello-world:latest Hello from Docker! This message shows that your installation appears to be working correctly. To generate this message, Docker took the following steps: 1. The Docker client contacted the Docker daemon. 2. The Docker daemon pulled the "hello-world" image from the Docker Hub. (amd64) 3. The Docker daemon created a new container from that image which runs the executable that produces the output you are currently reading. 4. The Docker daemon streamed that output to the Docker client, which sent it to your terminal. To try something more ambitious, you can run an Ubuntu container with: $ docker run -it ubuntu bash Share images, automate workflows, and more with a free Docker ID: https://hub.docker.com/ For more examples and ideas, visit: https://docs.docker.com/get-started/
That's it!
See Also
Leave a Reply