This past week (actually past two weeks) I worked on building a compact NAS storage system using the Helios 4 kit I had received a few weeks ago. The expected end result is a 4-drive RAID5 storage available to Windows, Linux and Mac backup clients via native file transfer protocols.
Helios 4 NAS storage
Helios 4 looks pretty great: it's a system-on-the-chip with 4 SATA ports and a gigabit network interface, supplied with additional hardware functionality for speeding up RAID operations.
- Hardware base: Marvell ARMADA® 388 MicroSOM
- CPU: dual-core ARM Cortex A9 CPU clocked at 1.6 Ghz
- RAM: 2GB of ECC (very cool that it's ECC!)
- Storage: 4 SATA ports + microSD card for the OS image
I got my Helios 4 as part of the 3rd wave on the campaign, it seems to be available for pre-order now.
Building Helios 4
The kit arrives as a batch of parts that are practically ready to be assembled:
Let's peel the packaging paper off:
… now attach the disks:
… install motherboard:
… and add the fans:
And that's it! We have a brand new shiny network storage, ready for software install and configuration:
Armbian installation for Helios 4
You can download the latest Armbian version here: Kobol.io – Helios 4 images.
Let's burn the IMG of Armbian onto a microSD card:
[email protected]:~# dd if=/home/greys/Downloads/Armbian_5.77_Helios4_Debian_stretch_next_4.14.106.img | pv | dd of=/dev/mmcblk0p1 bs=1M 2121728+0 records in3MiB/s] [ <=> ] 2121728+0 records out 1086324736 bytes (1.1 GB, 1.0 GiB) copied, 39.7346 s, 27.3 MB/s 1.01GiB 0:00:39 [26.1MiB/s] [ <=> ] 0+13928 records in 0+13928 records out 1086324736 bytes (1.1 GB, 1.0 GiB) copied, 108.371 s, 10.0 MB/s [email protected]:~# ls
Cool! Now we just put this into the Helios 4 system and power it on. Now would also be the time to connect the USB to microUSB cable into my XPS Laptop and use the picocom to connect over it to the Helios 4 console (I had to apt install picocom). Since I use the Dell XPS 13 2019 model, there are no USB ports – only USB-C. So in my case the console connection is: USB-C adapter -> USB cable -> micro-USB connector plugged into Helios 4.
[email protected]:~$ sudo picocom -b 115200 /dev/ttyUSB0
this will eventually show the fully booted OS and progress with Helios 4 setup:
I have configured my account greys and then progresses with post configuration.
Helios 4 Post Configuration
When you boot, you get a fully working Debian Stretch based system, ready for post-configuration.
Step 1: configure static IP address
Once you login, it's probably best to set the static IP address and then continue setup using SSH connection instead of USB serial.
As root, edit the /etc/network/interfaces file and add eth0 settings similar to these:
auto eth0 iface eth0 inet static address 192.168.1.XXX netmask 255.255.255.0 gateway 192.168.1.1
IMPORTANT: don't forget to replace 192.168.1.XXX with a correct IP address in your network, like 192.168.1.123. Same goes for the gateway IP address.
Once changes are made, reboot using shutdown -r now and reconnect using ssh.
Step 2: install the OpenMediaVault
Run the armbian-config command as root and select Software
… then select Softy:
… and then select OMV:
that's it: we can now open the IP address in our browser and login using default admin user (username: admin, password: openmediavault):
Step 3: change default OpenMediaVault login
This is admin/openmediavault initially, so change the password as soon as you can using General Settings and Web Administrator Password section:
Always Apply Your OpenMediaVault Changes
VERY IMPORTANT: one rather annoying feature of OpenMediaVault is that you have to apply all of your changes. You can create new users or configure shares or even build RAID arrays, but that's all happening in the OMV interface. You have to click the Apply in the yellow status prompt at the top part of your browser window with OMV to actually commit changes and restart relevant services. The reason this is annoying is because this yellow prompt doesn't show up immediately, so when you move to a different section of OpenMediaVault administration you may forget about it and not apply changes until much later.
Here's an example of this thing:
RAID5 setup on Helios 4
From the main menu of the OMV, I created a RAID5 array using the 4 disks I have available.
I contemplated getting a 2-disk parity setup, but decided against it because this NAS server is a secondary storage device in my home office – I have a Synology system running 2-disk parity with larger disks.
The plan for Helios 4 system is therefore to be about 8.5TB of NAS storage for immediate backups and temporary projects. Critical data will be backed up to the Synology NAS system in parallel (definitely NOT from Helios 4 to Synology, but directly from backup clients).
Check which disks you have:
Now erase (wipe) each one of them:
Here's how RAID5 is created:
And here you can see how it looks from the command line:
[email protected]:~# mdadm --detail /dev/md0 mdadm: Unknown keyword INACTIVE-ARRAY /dev/md0: Version : 1.2 Creation Time : Sun Apr 7 23:22:37 2019 Raid Level : raid5 Array Size : 8790405120 (8383.18 GiB 9001.37 GB) Used Dev Size : 2930135040 (2794.39 GiB 3000.46 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Intent Bitmap : Internal Update Time : Sun Apr 7 23:23:14 2019 State : clean, resyncing Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 512K Resync Status : 0% complete Name : helios4:0 (local to host helios4) UUID : 97115daa:993d28e6:50a61a7c:c980f755 Events : 9 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 0 1 active sync /dev/sda 2 8 32 2 active sync /dev/sdc 3 8 48 3 active sync /dev/sdd [email protected]:~#
The performance is pretty impressive: initial RAID5 re-sync is happening with the average speed of 80MB/sec (default non-prioritised sync on my 2-disk parity Synology system was around 20MB/sec last time I checked):
[email protected]:~# cat /proc/mdstat
Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sdd sdc sda sdb
8790405120 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/4] [UUUU] [=>……………….] resync = 8.5% (250402304/2930135040) finish=555.8min speed=80342K/sec bitmap: 21/22 pages [84KB], 65536KB chunk
Even before this re-syncing completes, you can create filesystem on the RAID5 array that was just created:
Network Shares Setup
After wasting quite a few days trying to access basic network shares using my primary user on the new NAS system, I realised that it was a mistake: that user was for administrative purposes, and not a member of the users group. Turns out, I either need to add users group membership for greys or create another user specifically for network share access.
After brief consideration I decided to go with a separate user called nas: passwords have to be in clear text form in some of my automation scripts, and so it makes sense to use specific user instead of risking password of an admin user to be leaked.
Add shared folder:
Now you need to enable sharing service, select the ones you need from the menu and tick Enable option like this:
You can always select the Dashboard in the menu to see which services are enabled:
For every shared folder you create, be sure to set the privileges:
Mounting NAS storage from MacOS
So far I only accessed storage from Windows and MacOS.
Here are the commands I used for mounting APF (Apple Filing Protocol) share and CIFS (Windows/Samba) share – they both point to the same folder on the Helios 4 storage, actually.
First, create mountpoints:
maverick:~ root# mkdir /windows_try /afp_try
Now, let's try Windows share access:
maverick:~ root# mount_smbfs smb://nas:[email protected]/Stuff /windows_try
And now, MacOS style via AFP:
maverick:~ root# mount_afp afp://nas:[email protected]/Stuff /afp_try
Note: I replaced the last octet in the helios4 IP with XXX and also swapped my real nas user password with the SECRETPASSWORD word – these need to be set to the real values of your NAS storage and user if you want to try the same setup.
Things achieved with this project or scheduled for the nearest future:
- Setup open-source NAS storage with RAID5 setup using 4 disks – DONE
- Setup network share access for Windows, Linux and MacOS – DONE
- Setup nas user with SSH keys for passwordless access in MacOS and Linux – PENDING
- Setup automated rsync of project areas on my laptops to NAS storage – PENDING
- Setup automated downloads of my hosting backups to new NAS storage – PENDING
- Setup secondary RSyslog server on the new NAS storage – PENDING
That's it for now! I'm glad I completed this project at last – Helios 4 seems like a fun system to use and a great option for exploring ways of configuring and presenting NAS storage using latest software solutions available.